Lesson 14 of 18
The Mill · stone 14Intermediate5 minute read

Revision passes on a calendar

Turning an ordered list of revision passes into dates: sizing each pass by what it touches and by the writer’s own recorded pace, placing it in the kind of time it needs, giving it a condition that ends it, and building in slack and rest so the revision finishes without a crunch.

Reviewed by BlurbBio editorial team, 2026-11-14

The Mill: a stone water mill with a big turning wheel on a river bend.
The Mill · Revision and self-editing, stone 14 of 18

From order to dates

Knowing the order of your passes tells you what comes first. It does not tell you when the revision ends, and a revision with no end tends to fill whatever time it is given.

Each pass is sized by what it touches and by your own recorded pace before it goes on the calendar.

To put passes on a calendar, size each one. Count what it touches: a structural change to nine chapters is a different job from a line pass over thirty. Then multiply by your own pace for that kind of work. The best source is your last revision: how long a big change took, how many chapters a line session covered. If you have no record, guess, write the guess down, and correct it after the first week.

Size from what you did, not what you hope to do. A schedule built on your best week will be broken by an ordinary one.

Match the pass to the time

Passes need different kinds of time. Structural work and arcs need long, unbroken stretches: you have to hold a large part of the book in your head at once, and twenty minutes is gone before you have picked it up.

Big passes go in the long stretches of your week and small passes in the gaps.

Line edits, continuity checks and searches for crutch words go well in short sessions. Each chapter is a small job that can be finished and ticked off.

So look at your week before you place the passes. Put the big passes where your long stretches are, even if there are only one or two a week, and the small ones in the gaps. A structural pass forced into lunch breaks will drag on and go wrong; a line pass can live there quite happily.

A finish for each pass, and slack

Give every pass a condition that ends it: every scene in chapters 10 to 20 has a change written beside it; every conversation has been read aloud once; every chapter has been checked against the style sheet. When the condition is met, the pass is over, even if you could keep going.

Each pass in the schedule has a question, a reach, a size and a condition that ends it.

Then add slack. A spare week after the structural pass is the most useful, because structural changes are the hardest to size and the likeliest to grow. Put a week of rest between heavy passes, too, so that you come to the next one able to see the book.

When a pass overruns, use the slack first. If that runs out, move the later dates. Do not squeeze the remaining passes into the old ones, or borrow the time from sleep.

Example

A revision schedule

A historical novelist turns her list of passes into dates.

The Fenwick Daughters: revision schedulehistorical

From my notes on the last revision: a structural change took about two Saturdays for every three chapters it touched.1 A line pass ran at about three chapters a morning.

My week: an hour before work on weekdays, and four hours on Saturdays.

1. Structure: move the trial to the middle and cut the cousin. Chapters 11 to 19, so about six Saturdays.2 Done when the new outline and the chapters agree. Then a spare week.3

2. Arcs: does Harriet change in steps the reader can see? Her twelve chapters, Saturdays, three weeks. Done when every step has a scene that shows it.

Rest: one week. No reading the draft.4

3. Dialogue: read every conversation aloud. Weekday mornings, three weeks. Done when every scene has been read aloud once.5

4. Line: 32 chapters at three a morning, about eleven mornings. Weekdays, three weeks to allow for bad ones.6 Done at the last page.

5. Polish: names, dates and the style sheet. Weekdays, one week.

About four and a half months in all. Readers by the end of May.

  1. “From my notes on the last revision: a structural change took about…”Her pace comes from her own record, not from a hope.
  2. “Chapters 11 to 19, so about six Saturdays.”The pass is sized by what it touches. The structural work sits in the long Saturday sessions.
  3. “Then a spare week.”Slack goes straight after the pass most likely to overrun.
  4. “Rest: one week. No reading the draft.”Rest is on the schedule between the heavy passes and the lighter ones.
  5. “Done when every scene has been read aloud once.”A finish condition she can check, so the pass ends.
  6. “Weekdays, three weeks to allow for bad ones.”The short-session pass goes in the weekday hours, with room for ordinary bad days.

Before and after

Sized by hope

The one faultOne pass is sized by hope, not by the writer’s own pace.

Weaker versionNight Ferry: revision schedule (first version)

I have three evenings a week, about ninety minutes each.

1. Structure: fold the brother into the ferry plot. Chapters 4 to 15. Three weeks, then a spare week. Done when the outline and the chapters match.

2. Scenes: does each scene change something? Every chapter, four weeks. Done when every scene has its change written beside it.

3. Line: all 40 chapters in one week. Done at the last page.

4. Polish: names and dates against the style sheet. One week. Done when every chapter has been checked.

Showing the weaker version.

The two schedules are the same except for the line pass. Both size the structural pass, add a spare week and give every pass a finish condition.

The first gives forty chapters one week: three evenings, more than thirteen chapters each. Nothing in the writer’s record suggests that, and the pass will either be rushed or overrun, pushing everything after it.

The second takes the pace from the last revision, two chapters an evening, and lets that set the length. Seven weeks looks slower on paper. It is the version that ends when it says it will.

Follow the rule by default. Break it only when breaking it does a job.

The exception

When to break it

When a publisher’s editor has set the date for your revisions, start from that date and work backwards. If the passes do not fit, talk to your editor early, or decide which passes to shorten. Do not plan to fit them by working every evening and weekend.

A light revision may need no schedule at all, just a date. And if the structural pass shows that the book needs a different shape, stop scheduling the later passes. Write a new structural note first; the dates can wait until you know what you are revising.

Check yourself

Quick checkabout 2 min

Ten days over

A romance writer’s structural pass has overrun by ten days. Her schedule has a spare week after it, then four more passes with dates, ending with two early readers who have agreed to read in June. What should she do?

Key takeaway

Size each pass by what it touches and by your own recorded pace, and place it in the kind of time it needs: long stretches for big passes, short sessions for small ones. Give every pass a condition that ends it, put slack after the structural pass and rest between heavy ones, and move dates rather than squeeze them.

Practise

Exercises for this lesson

One is open to try now. The rest are free with an account.

Apply

Schedule your passes

Write a revision schedule for your book: each pass sized, placed in the right kind of time, given a finish condition, with slack and rest included.

Use it on your own book

With a free account you can work through this on a passage of your own and keep the result.